A hand–mixable, fast–setting, copper–reinforced epoxy putty that quickly repairs pipes, tanks and vessels made of copper, brass, bronze and other non–ferrous metals. After mixing, it forms a polymer compound that is extremely tough and durable and offers exceptional adhesion. Each handy stick contains pre-measured portions of activator and base throughout no measuring or mixing tools are necessary. The consistency (like modelling clay) eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped as needed before curing begins. Cured B2004 has the same appearance and texture of metal. Suitable for interior or exterior use.
Used to repair freeze breaks, leaking household hot waterlines and other plumbing problems. B2004 will seal copper gutters, downspouts, pipes, elbows, joints, sleeves and traps, and will bond to damp, wet and slow leaking surfaces.
INSTRUCTIONS FOR USE
Ensure all surfaces are clean, dry and free of any loose material, roughen surface to create a solid base for the putty to adhere to. Cut off amount of putty needed and knead with fingers to a uniform colour, all green dye must be gone and a uniform copper colour is left.
PROCEDURE FOR APPLICATION
Apply to surface to be repaired within 2 minutes of mixing. The mixed epoxy does not show much bond strength at this time, but can be kneaded or formed into cracks or holes to be filled.
After 5-10 minutes the epoxy will harden and form a firm bond. Full chemical cure is reached in 60 minutes. For a smooth appearance of cured epoxy hand rub the epoxy with water prior to hardening.
Store in a cool dry place.