A hand–mixable, specialty epoxy putty for repairs to damp, wet areas and underwater surfaces. After mixing, it forms a polymer compound that may be applied underwater (either fresh or salt water) and will bond tenaciously to substrates such as fiberglass, concrete, ceramic, glass, metal, wood, and many plastics. Each stick contains pre–measured portions of base and activator throughout – no measuring or mixing tools are necessary. The consistency (like modelling clay) eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped and formed as needed before curing begins. After 60 minutes the application can be drilled, sawed, sanded, carved, and painted. B2007 cures to an off–white colour.
Can be used to patch dings, holes, gouges, repair decks and hulls, pools hot tubs and spas, marine recreational equipment, leaking gaskets, gutters and tanks. B2007 will bond fiberglass, metal, wood, concrete, glass and many plastics. B2007 works on wet, damp, dry surfaces and even underwater.
INSTRUCTIONS FOR USE
Ensure all surfaces are clean, dry and free of any loose material, roughen surface to create a solid base for the putty to adhere to. Cut off amount of putty needed and knead with fingers to a uniform colour, all black dye must be gone and a uniform light blue colour is left.
PROCEDURE FOR APPLICATION
Apply to surface to be repaired within 2 minutes of mixing. The mixed epoxy does not show much bond strength at this time, but can be kneaded or formed into cracks or holes to be filled.
After 5-10 minutes the epoxy will harden and form a firm bond. Full chemical cure is reached in 60 minutes. For a smooth appearance of cured epoxy hand rub the epoxy with water prior to hardening.
Store in a cool dry place.